LoRa to BACnet

Setup the rubix-compute as a native BACnet/IP device with LoRa

reference

RC is a rubix-compute
wires is a rubix-wires

prerequisites

1. You need a rubix-compute and an Rubix iO-16
2. power the RC
3. make sure you can ping the RC default IP on ETH-1 is 192.168.15.10 see networking for more info

Setup

1. Download once downloaded just double-click on the icon to run
2. Getting setup
3. Add a token to download
4. Add a supervisor
5. Add a host (rubix-compute)
6. Install apps , driver-bacnet & rubix-wires & driver-lora

BACnet config

After the bacnet-driver is installed we need to

1. Set the bacnet device-name
2. Set the bacnet device-id
3. Set how many IO-16s we have plugin into the side

Adding nodes in wires

So a BACnet-supervisors can read/write to the BACnet this is archived via by adding some nodes in wires

1. Add a node called bacnet-server (if not already added)
2. Add a node called flow-network (if not already added)

Mapping

mapping